general |
TBBS |
N -tert-butyl -2- benzothiazyl sulfenamide |
Provides fast cure and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products. |
MSDS
MSDS
|
general |
MBTS |
2.2'- Dithiobisbenzothiazole |
A medium fast curing primary accelerator for all sulfur curable elastomers. |
MSDS
MSDS
MSDS
TDS
TDS
TDS
|
general |
CBS |
N- Cyclohexyl -2- benzothiazolesulfenamide |
It is an after-effect accelerator. It has high performance of scorching resistance and short curing time. |
MSDS
MSDS
TDS
TDS
|
general |
DCBS |
N, N- Dicyclohexyl -2- benzothaizolesulfenamide |
Suitable for rubber compounds that need to connect directly to metal surfaces coated steel wire or brass . |
MSDS
MSDS
TDS
TDS
|
general |
MBT |
2- Mercaptobenzothiazole |
A moderately fast curing primary accelerator for natural and synthetic rubbers. |
MSDS
MSDS
MSDS
TDS
TDS
|
general |
DPG |
Diphenyl guanidine |
DPG is used as a secondary accelerator in combination with thiazoles and sulfenamides in most of the sulfur cured elastomers.In NR and SBR lattices it is used as secondary gelling agent foam processes. |
MSDS
TDS
|
general |
TMTD |
Tetramethyl thiuram disulfide. |
Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance In sulphurless and EV cure systems. |
MSDS
|
general |
TMTM |
Tetramethyl thiuram monosulfide. |
Generally used as a secondary accelerator or as a booster for sulphenamides to achieve faster cure rate. Distinguished by very good processing safety in comparison with other thiurams, high curing activity and no discoloration. No cure activity in the absence of added elemental sulphur. An excellent accelerator for polychloroprene in association with Willing DPG and Sulphur. |
MSDS
|
general |
ZDEC |
Zinc diethyl dithiocarbamate. |
Used for NR, IR, BR, SBR, NBR, EPDM and their latexes. A fast curing primary or secondary effective ultra-accelerator for natural and synthetic latex form compounds. |
MSDS
|
general |
ZMBT |
Zinc 2-mercaptobenzothiazole. |
Used for NR, IR, SBR, NBR, EPDM and latex. Used as a secondary accelerator in combination with Willing PZ and Willing EZ. Similar performance as M at curing temperature in dry rubber application. |
MSDS
|
general |
ZBDC |
Zinc dibenzyl dithiocarbamate.. |
Safe-processing secondary accelerator. Can be used as primary in latex. High resistance to hydrolysis; low solubility in rubbers. Fast at higher vulcanization temperatures. |
MSDS
|
general |
TETD |
Tetramethyl thiuram disulfide. |
Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanization plateau with good heat aging and compression set resistance in sulphurless and EV cure systems. Good color retention is obtained in non-black vulcanization. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanization of polychloroprene rubber with Willing ETU. |
MSDS
|